S00080-06
$369.00 $399.00
Factor 55 Flat link shackle mounts. An excellent upgrade from the standard winch hooks. Compatible with all Sherpa winch ropes and cables.
Made in the USA
Note: All FLATLINK (except XXL) winch shackles are supplied with the optional rope guard factory fitted by Factor 55. The rope guard not only protects the rope from UV damage but it also prevents wear when climbing rocks. It also looks great and increases the strength of the shackle.
The FlatLink provides a means to eliminate the conventional winch hook and replace it with a safer and more secure screw pin shackle resulting in a CLOSED SYSTEM WINCHING operation
EXPERT
XXL
The FlatLink E provides a means to eliminate the conventional winch hook and replace it with a safer and more secure screw pin shackle resulting in a CLOSED SYSTEM WINCHING operation. The large pear shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points. This makes the new FlatLink E more versatile than the current FlatLink design, but it also adds the possibility of a dangerous shackle side loading condition (See Picture), especially during momentary slack conditions. A shackle side loading condition is not possible with our standard FlatLink shackle mount due to the shackle pin mounting constraint. For the recreational off roader we highly recommend the safer standard FlatLink product, not the FlatLink E. This way the winch operator does not have to monitor whether the shackle may have shifted and rotated in the recovery tackle. The FlatLink E is only available in the Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
Conventional winch hooks can cut and fray recovery straps and often allow strap ends to escape during momentary slack cycles of a typical winching recovery. Screw pin shackles do not allow strap loops to escape due to their secure screw pin attachment. The FlatLink E does not require splicing and is compatible with steel cables or synthetic ropes up to 3/8 inches in diameter. The cable eye is retained in the FlatLink E by a 5/8 inch diameter 6Al4V Titanium double shear pin and internal snap ring. Installation takes only minutes. The EPDM Rubber Guards protect alloy fairleads and are securely attached to the FlatLink E with 4 barbed tips each. The FlatLink E stows neatly against either roller or Hawse type fairleads and is designed to be used with common 3/4 inch shackles.
U.S. Utility Patent No. 9,388,025
Foreign Patents Pending
XXL
Compatible with wire rope diameters of up to 3/4″ and synthetic rope tube thimbles up to 5/8″ in diameter. Fits shackle pin diameters of 1 1/8″. 7/8″ diameter titanium double shear pin. Minimum breaking strength of 65,000 lbs. Note: No rope guard is available for this size.
U.S. Utility Patent No. 9,388,025
Foreign Patents Pending
FREE Shipping on all WINCH orders Australia wide!
To get a freight quote add the item to the Shopping Cart. On the Shopping Cart page enter your State and Post Code then click Calculate Shipping Rates.
INTERNATIONAL ORDERS: For orders outside of Australia contact us for a freight quote. International orders are shipped using Fedex.
PO BOXES: Provide a physical shipping address on check out as most Sherpa products are too large or heavy to be delivered to a PO Box.
AUTHORITY TO LEAVE: Unless specified otherwise your order will be shipped with Authority To Leave. This means the courier delivering your order will 'Safe Drop' the parcel where possible. If you do not wish this to occur please contact us.