Winch Anchor

Winch Anchor Specifications:

• Load Capacity - 12,000 Lbs
• Includes U-shackle
• Blade dimensions:  Length 50cm - Width 60cm
• Weight: 16kg
• Includes Sherpa 4x4 Offroad carry bag rated to 100+kg
• 3 Year Warranty

Winch Anchor Instructions:

Step 1:
Remove the R pin from the handle.

Step 2:
Now fold down the anchor wings.

Step 3:
Unthread the bow shackle pin and remove.

Step 4:
Remove the handle from the anchor.

Step 5:
With the wings in the open position slide the shank forward.

Step 6:
Reinstall the bow shackle.

Step 7:
Attach the hand to the operating position and secure in place with the R pin.

Step 8:
Attach the winch hook to the bow shackle.

You are now ready to recover your vehicle!

Packing up the ground anchor is the opposite of assembly.

Safety Pointers:
- Always exercise precaution as high tensile loads are in play.
- Always use winch dampeners.
- Do Not exceed the load rating of the anchor.
- Do Not stand between the anchor and the vehicle when winching.
- Always check the winch anchor for signs of stress, fatigue or damage before use.

FREE Shipping on all WINCH orders Australia wide!

To get a freight quote add the item to the Shopping Cart. On the Shopping Cart page enter your State and Post Code then click Calculate Shipping Rates.

INTERNATIONAL ORDERS: For orders outside of Australia contact us for a freight quote. International orders are shipped using Fedex.

PO BOXES: Provide a physical shipping address on check out as most Sherpa products are too large or heavy to be delivered to a PO Box.

AUTHORITY TO LEAVE: Unless specified otherwise your order will be shipped with Authority To Leave. This means the courier delivering your order will 'Safe Drop' the parcel where possible. If you do not wish this to occur please contact us.