Your Cart is Empty
Sherpa 4x4 Long Distance Pressure Washer Nozzles
Long Distance Pressure Washer Nozzles
$10.00$79.00 - $99.00
SPWSSNS
Sherpa 4x4 Long Distance Pressure Washer Nozzles
The Sherpa 4x4 Long Distance Pressure Washer Nozzles are designed to extend cleaning reach for high or hard-to-access areas such as upper-storey walls, building facades and other elevated surfaces.
Available in two configurations, the range includes a high-pressure two-nozzle set for common 1/4" quick-connect pressure washer systems and a high-flow brass nozzle for applications requiring greater water flow.
These nozzles are designed to produce a concentrated water stream for cleaning areas that are difficult to reach with a standard fan nozzle.
They can be useful for washing upper-storey walls, building exteriors, sheds and other elevated surfaces where additional cleaning reach is required.
Available Models
SPWSSNS – Long Distance Two-Nozzle Set
This two-piece set is designed for pressure washers using common 1/4" quick-connect fittings. It includes:
- 1 x long-distance soap nozzle
- 1 x long-distance rinse / flush nozzle
The nozzles use stainless steel outer construction with hardened inserts and are rated for pressure washer systems up to 4,000 PSI (275 Bar).
SPWLDSN – High-Flow Brass Long Distance Nozzle
This brass nozzle is designed for higher-flow pressure washer applications. It uses a 1/4" quick-connect fitting and is rated for flow rates from 18–50L/min.
Trigger Gun shown in images sold separately
Key Features
- Designed for extended cleaning reach
- Suitable for high and hard-to-access surfaces
- 1/4" quick-connect fittings
- SPWSSNS supplied as a two-nozzle soap and rinse set
- SPWSSNS rated to 4,000 PSI (275 Bar)
- SPWLDSN suited to higher-flow applications
- SPWLDSN rated to 580 PSI (40 Bar)
- Suitable for compatible pressure washer systems
Typical Applications
- Upper-storey exterior walls
- Building facades
- Sheds and workshops
- High walls and eaves
- Hard-to-reach exterior surfaces
Specifications
| Specification | SPWSSNS | SPWLDSN |
|---|---|---|
| Type | Two-nozzle long-distance set | High-flow brass long-distance nozzle |
| Maximum Pressure | 4,000 PSI (275 Bar) | 580 PSI (40 Bar) |
| Flow Range | 7.8–39L/min | 18–50L/min |
| Maximum Temperature | 60°C | 50°C |
| Connection | 1/4" quick connect | 1/4" quick connect |
| Construction | Stainless steel outer with hardened insert | Brass |
Compatibility & Use
Before use, confirm that the pressure washer operates within the nozzle's stated pressure and flow range and uses a compatible 1/4" quick-connect fitting.
Long-distance cleaning performance will vary depending on water pressure, flow rate, nozzle selection, wind and the height and distance of the target surface.
Important: High-pressure water can cause serious injury. Never direct the nozzle at people or animals, and use appropriate care when cleaning elevated surfaces.